240W Single Output Industrial DIN RAIL Power Supply 24V - 10A

CARACTERISTIQUES :

• Universal AC input / Full range
• Built in active PFC function
• Protections: Short circuit / Overload / Over voltage / Over temperature
• Cooling by free air convection
• Can be installed on DIN rail TS-35/7.5 or 15
• UL 508(industrial control equipment)approved
• indicateur LED d'alimentation
• 100% full load burn-in test
• Fixed switching frequency at 100KHz
• 3 years warranty
• POUR L'USAGE PROFESSIONNEL
• Cet appareil doit être installé par un technicien qualifié.

SPECIFICATIONS :

• OUTPUT:
  • DC VOLTAGE: 24V
  • RATED CURRENT: 10A
  • CURRENT RANGE: 0 ~ 10A
  • RATED POWER: 240W
  • RIPPLE & NOISE (max.) Note.2: 80mVp-p
  • VOLTAGE ADJ. RANGE: 24 ~ 28V
  • VOLTAGE TOLERANCE Note.3: ±1.0%
  • LINE REGULATION: ±0.5%
  • LOAD REGULATION: ±1.0%
  • SETUP, RISE TIME: 800ms, 40ms/230VAC 800ms, 40ms/115VAC at full load
  • HOLD UP TIME (Typ.): 24ms/230VAC 24ms/115VAC at full load
• entrée:
  • VOLTAGE RANGE: 85-264VAC- 120-370VDC
  • FREQUENCY RANGE: 47 ~ 63Hz
  • POWER FACTOR (Typ.): 0.96/230VAC 0.99/115VAC at full load
  • rendement (typ.): 84%
  • courant CA (typ.): 2.8A/115VAC 1.4A/230VAC
  • courant d'appel (typ.): COLD START 27A/115VAC 45A/230VAC
  • LEAKAGE CURRENT: <3.5mA / 240VAC
• protection:
  • surcharge:
    • 105 ~ 150% rated output power
    • Protection type : Constant current limiting, recovers automatically after fault condition is removed
  • OVER VOLTAGE:
    • 30 ~ 36V
    • Protection type : Shut down o/p voltage, re-power on to recover
  • OVER TEMPERATURE:
    • 100°C ±5°C (TSW1)detect on heat sink of power transistor
    • Protection type : Shut down o/p voltage, recovers automatically after temperature goes down
• environnement:
  • WORKING TEMP.: -10 ~ +70°C (Refer to "Derating Curve")
  • WORKING HUMIDITY: 20 ~ 90% RH non-condensing
  • STORAGE TEMP., HUMIDITY: -20 ~ +85°C , 10 ~ 95% RH
  • TEMP. COEFFICIENT: ±0.03%/ (0 ~ 50°C)
  • vibration: 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes- Mounting: Compliance to IEC60068-2-6
• SAFETY & EMC (Note 4):
  • SAFETY STANDARDS: UL508, UL60950-1, TUV EN60950-1 approved
  • WITHSTAND VOLTAGE: I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
  • ISOLATION RESISTANCE: I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
  • EMC EMISSION: Compliance to EN55011,EN55022 (CISPR22) Class B, EN61000-3-2,-3
  • EMC IMMUNITY: Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, EN61000-6-2 (EN50082-2), heavy industry level, criteria A
• autres:
  • MTBF: 289.9Khrs min. MIL-HDBK-217F (25°C )
  • dimensions: 125.5 x 125.2 x 100mm
  • PACKING: 1.2Kg- 12pcs/15.5Kg/1.29CUFT

DOCUMENTS :

• Fiche d'information
  
• Fiche d'information
  Consignes de sécurité générales