PWM-120 is one 120W waterproof constant-voltage output LED power supply series. Differentiating from general DC output power supplies, PWM-120 transmits PWM style output, adapting to directly driving all kinds of LED strips that the color temperature can be maintained and the brightness homogeneity can be assured. Adopting a universal input range between 90VAC and 305VAC and incorporating the built-in PFC function, this series is also designed with a 2 in 1 dimming function (0~10Vdc or PWM ...
En achetant ce produit vous pouvez gagner jusqu'à 10
points de fidélité.
Votre panier totalisera 10
points pouvant être transformé(s) en un bon de réduction de
1,50 €.
PWM-120 is one 120W waterproof constant-voltage output LED power supply series. Differentiating from general DC output power supplies, PWM-120 transmits PWM style output, adapting to directly driving all kinds of LED strips that the color temperature can be maintained and the brightness homogeneity can be assured. Adopting a universal input range between 90VAC and 305VAC and incorporating the built-in PFC function, this series is also designed with a 2 in 1 dimming function (0~10Vdc or PWM signal) that simplifies the brightness adjustment for system designers so as to achieve light reduction and energy conservation. Providing a high efficiency up to 91% and a low no load power consumption below 0.5W, PWM-120 can satisfy the energy saving demand for the new generation LED lighting. The class ?? design (without FG pin) and the double insulation weather-resistant cable (SJTW) on the input side make it convenient for users to flexibly install on various types of lighting systems. The enclosure design is a 94V-0 flame retardant plastic case. The interior is fully potted with silicone that enhances the heat dissipation and allows PWM-120 to meet the anti-vibration demand up to 5G- it also thus conforms to IP67 level, enabling PWM-120 to be used in a highly dusty and highly humid harsh environment . The entire series can operate under the temperature between -40~+70?? and comply with the relevant global lighting safety certification.
CARACTERISTIQUES :
universal AC input / full range (up to 305VAC)
fonction PFC active intégrée
constant voltage PWM style output
dimming range: 0~100%
high efficiency up to 91%
protections: short circuit / over load / over voltage / over temperature
Classe II (sans mise à la terre)
built-in 2 in 1 dimming function (0~10Vdc or PWM signal)
convient aux endroits secs / humides / mouillés
no load power consumption < 0.5W
5 ans de garantie
SPECIFICATIONS :
output:
tension CC: 24 V
courant nominal: 5 A
puissance nominale: 120 W
plage de gradation: 0 ~ 100 %
PWM frequency (typ.): 300 Hz
tolérance de tension: ± 4.0 %
set up, rise time: 500 ms, 80ms 230 VAC / 115 VAC at full load
hold up time: 16 ms / 230 VAC 16 ms / 115 VAC at full load
entrée:
plage de tension: 90 ~ 305 VAC 127 ~ 431 VDC
plage de fréquence: 47 ~ 63 Hz
facteur de puissance: PF > 0.97 / 115 VAC, PF > 0.96 / 230 VAC, PF 0.94 / 277 VAC at full load (please refer to 'power factor characteristic' curve)
total harmonic distortion : THD < 20% when output loading >/= 60 % at 115 VAC / 230 VAC input and output loading >/= 75 % at 277 VAC input
efficacité: 90%
courant CA: 1.3 A / 115 VAC 0.65 A / 230 VAC 0.55 A / 277 VAC
appel de courant: cold start 60 A (twidth = 550µs measured at 50 % Ipeak) at 230 VAC
leakage current: < 0.25 mA / 277 VAC
protection:
surcharge:
108 ~ 120 % rated output power
protection type: hiccup mode, recovers automatically after fault condition is removed
surtension:
28 ~ 34 V
type de protection: fermer o/p tension, re- power pour récupérer
surchauffe: shut down o/p voltage, re-power on to recover
environnement:
working temp: -40 ~ +70°C (refer to 'derating curve')
humidité de service: 20 ~ 95 % RH non-condensing
storage temp, humidity: -40 = +80°C, 10~95% RH
coefficient de température: ± 0.03 % / °C (0~50°C)
vibration: 10 ~ 500 Hz, 5 G 12min / 1 cycle, period for 72 min each along X, Y, Z axes
sécurité & EMC:
normes de sécurité: UL8750, CSA C22.2 No. 250.13-12, ENEC EN61347-1, EN61347-2-13, EN62384 independent IP67 approved- design refer to EN60335-1
tension d'isolation: entrée vers sortie : 3.75 kVCA
résistance d'isolement: entrée vers sortie : > 100 Mohm / 500 VCC / 25 °C / 70 % RH
EMC emission: compliance to EN55015, EN61000-3-2 Class C (>= 60 % load)- EN61000-3-3
EMC immunity: compliance to EN61000-4-2,3,4,5,6,8,11, EN61547 light industry level (surge L-N: 2 kV), criteria A